|
|
Electrical Equipment & Accessories
|
Suppliers Directory
|
ELECTRONIKA ENTERPRISES
| | Address : |
BHADRAKALI POLE, RAOPURA ROAD, |
| Telephone : |
265-313761 |
| Fax : |
265-421260 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
AC DC POWER SUPPLIES - UWC SERIES OF SWITCHING AC DC POWER IN 26 DIFFERENT MODELS. THESE UNITS HAVE CONTINUOUS SHORT CIRCUIT PROTECTION AND WILL OPERATE FROM 25 C TO +70 C AMBIENT. HIRELIABILITY UWC SERIES UP TO 20 W, IS THE DESIGN CHICE FOR MOST STRINGENT INDUSTRIAL APPLICATIONS. THESE OFFER EXCELLENT LINE REGULATION OF 1% 85 TO 265 V AC AND EXCELLENT LOAD REGULATION FROM 10 PER CENT TO 100 PER CENT, -2 PER CENT. THEY ALSO OFFER WIDE INPUT VOLTAGE RANGE OF 85 TO 256 V AC, 47 TO 440 HZ. STORAGE TEMPERATURE RANGES FROM -55 C TO -105 C WITH OUTPUT VOLTAGE TEMPERATURE COEFFICIENT AT 0.02 PER CENT/C
|
|
HARMONIC ATTENUATORS - VADODARA BASED ELECTRONIKA ENTERPRISES OFFERS HPHA1 SERIES OF HARMONIC ATTENUATORS MANUFACTURED BY PICO ELECTRONICS-USA, A PERFECT FRONT-END SOLUTION FOR UNIVERSAL AC OR 3 PHASE INPUT/DC OUTPUT APPLICATIONS. THE STANDARD 2.5" X 4.6" X 0.5" FOOTPRINT IS ONE OF THE SMALLEST AVAILABLE IN THE MARKET IN THIS POWER RANGE OFFERING A 365V REGULATED DC OUTPUT, IT CAN BE USED AS A FRONT END FOR PICO"S FD/ MD/ LFD/ LMD/ LPD/ PD AND HPD SERIES OF DC-DC CONVERTERS, WHICH CAN PROVIDE FROM 3.3 V TO 300 V DC. ALSO MANY LASER AND MOTOR APPLICATIONS ARE ABLE TO USE THE HPHA1"S 365 V DC OUTPUT DIRECTLY. IT HAS A UNIVERSAL INPUT VOLTAGE (47 TO 440 HZ) FROM 85 TO 250 V AC AND ITS OUTPUT POWER IS 1000W (DERATE FROM 110 V AC TO 85 V AC AT THE RATE OF 1.2% PER VOLT). ITS POWER FACTOR IS 0.99 (FROM 50% TO 100% FL) (50 TO 60 HZ). FOR SYSTEMS NEEDING SYNCHRONIZATION, A 100 KHZ SYNCHRONIZING SIGNAL IS AVAILABLE BY SYNCHRONIZING PIN. THE ENABLE PIN ENSURES THAT THE PICO DC-DC CONVERTER DOESNOT GET ACTIVATED UNTIL THE OUTPUT OF THE HPHA1 IS WITHIN ACCEPTABLE LIMITS. ITS EFFICIENCY IS 90% OR BETTER (95% MINIMUM FROM 170 TO 250 V AC OR FOR THREE-PHASE INPUT). THE OPERATING TEMPERATURE RANGES FROM 00 C TO +850 C BASE PLATE WITH NO POWER DERATING REQUIRED, FACILITATING A REGULATED 36+++5 V DC OUTPUT FOR MANY MOTOR, LASER AND DIRECT DRIVE APPLICATIONS.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
