|
|
Electrical Equipment & Accessories
|
Suppliers Directory
|
PHOENIX CONTACT INDIA PVT LTD
| | Address : |
M-45 MARKET, GREATER KAILASH II |
| Telephone : |
011-6218380, 810 |
| Fax : |
6469673 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
NETWORK MANAGEMENT MADE EASY - PRESENTING FACTORY MANAGER 2.0 FROM PHOENIX CONTACT IS A SOFTWARE TOOL MAKING IT POSSIBLE FOR EVEN NON-NETWORK EXPERTS TO IMPLEMENT AND MAINTAIN ETHERNET NETWORKS IN A SHORTER TIME. THE USER-FRIENDLY INTERFACE OF THE SOFTWARE WITH CLEAR PRESENTATION OF NETWORK DEVICES AND TARGETED SELECTION OF DEVICE INFORMATION ENABLES AN OVERVIEW EVEN IN LARGE SYSTEMS. FACTORY MANAGEMENT MANAGES CENTRAL IP ADDRESSES AND OTHER CONFIGURATION PARAMETERS. DEVICES ARE EASILY CONFIGURED VIA THE NETWORK. A DATABASE FOR THE NETWORK IS CREATED DURING THE PLANNING AND IMPLEMENTATION STAGES WHICH CAN BE USED FOR ALL FURTHER CONFIGURATION, OPERATING AND DIAGNOSTIC TASKS. TIMECONSUMING DOUBLE ENTRIES AND ERROR-PRONE DUPLICATED DATA STORAGE ARE PROBLEMS OF THE PAST. THE SOFTWARE TOOL PRESENTS THE USER WITH EASY-TO-USE SNMP-BASED NETWORK MANAGEMENT AND DIAGNOSTIC FUNCTIONS. PREDEFINED DEFAULT SETTINGS AND THE CONFIGURATION OF SEVERAL DEVICES SIMULTANEOUSLY LEAD TO CONSIDERABLE SAVINGS IN TIME. PROACTIVE DIAGNOSIS ENABLES CRITICAL DEVICE STATUSES TO BE DETECTED BEFORE THE DEVICE, AND THEREFORE ALSO THE NETWORK, FAILS. REDUNDANCY OPTIONS, FOR EXAMPLE FOR THE POWER SUPPLY OR DATA TRANSMISSION, ARE TESTED FOR AVAILABILITY. DEVICES WHICH TAKE OVER REDUNDANCY TASKS
|
|
TOOL HOLDERS & INSTRUMENTS FOR MACHINE TOOLS - HAIMER GMBH, GERMANY, WITH A LONG HISTORY OF MANUFACTURING PRECISION COMPONENTS FOR THE AEROSPACE INDUSTRY MANUFACTURES TOOL HOLDERS AND INSTRUMENTS FOR THE MACHINE TOOL INDUSTRY. THESE TOOL HOLDERS ARE AVAILABLE IN MAS, BT, CAT, DIN, AND HSK. ALL THESE ISO-40 TOOL HOLDERS ARE PRE-BALANCED TO 8000 RPM AT G6.3 AND ARE MANUFACTURED TO AT3 CLASS TOLERANCES. EVEN THE LONGEST TOOL HOLDER CONFORMS TO STRICTEST CONCENTRICITY STANDARDS. THESE HOLDRS ARE AVAILABLE IN WELDON, COLLET CHUCK OR COMBINATION SHELL MILL HOLDERS, INTEGRAL DRILL CHUCK, MORSE TAER HOLDERS AND TAPPING CHUCKS. THESE CHUCKS ARE AVAILABLE IN SHORT, LONG AND EXTRA LONG LENGTHS. ALL TOOL HOLDERS HAVE INTERNAL COOLANT TYPE A AND AD FACILITY AS STANDARD. COOLANT BORES FOR THROUGH COOLANT INSERTED MILLING CUTTERS AVAILABLE. A HIGH PRECISION HG CHUCKS MANUFACTURED BY HAIMER OFFERS 0.004 MM CONCENTRICITY ON THE CUTTER. THIS HOLDER HAS SPECIAL REAR CLAMPING FOR COLIET DUE TO WHICH APPROACH NOSE DIAMETER IS THINNER THAN THE STANDARD COLLET CHUCKS. THESE CHUCKS OFFER SIMILAR CLAMPING CAPACITY AS OF THE HYDRO GRIPPING CHUCKS.
|
|
POWER SUPPLIES - THE PRIMARY SWITCHED MODE REGULATORS DEVELOPED SPECIALLY FOR SUPPLING POWER TO 24V PHERIPHARALS WORLDWIDE ARE AVAILABLE IN SINGLE PHASE VERSION OF 120V AC TO 230V AC AND THE 3PHASE VERSION OF 3*40 V AC TO 500V AC.VOLTAGE CLIPS FOR UPTO 20MS IS CONSTANTLY PHASE FAILURE THE FULL OUTPUT POWER IS MADE AVAILABLE.CAPACITIVE LOADS AND SELECTIVE SYSTEMS ARE HANDLED BY POWER CONTROLLED U/I OUTPUT AND POWER RESERVE OF APPROXIMATELY 35% WHILE DOWNSTREAM FUSES TRIP RELAIBLY ALL OPERATING STATUES ARE INDICATED VIA LED AND CAN BE REMOTELY MONITORED VIA ACTIVE TRANSISTOR SWITCH OUTPUT AND ELECTRICALLY ISOLATED RELAY CONTACTS.
|
|
DISTRIBUTION BOARDS - 5 WAY DISTRIBUTION BOARDS ARE AVAILABLE FOR ECONOMICAL CONNECTION OF AS I CAPABLE SENSORS AND ACTUATORS AS WELL AS M8 MODULES OF THE S LINE TO THE TYPICAL AS I RIBBON CABLES VIA THE M12 SLOTS UP TO 2 A ARE SUPPLIED TO THE CONNECTED AS I COMPONENTS THE CONTACT TO THE RIBBON CABLES CAN BE LOADED WITH UP TO T8 A EACH CORRECTLY CONNECTED AUXILIARY AND AS I VOLTAGE IS INDICATED IN GREEN SHOULD THESE BE POLARITY REVERSED THIS IS INDICATED WITH A RED LED TO PROTECT AGAINST INCORRECT INSTALLATION THE DISTRIBUTION BOARD CAN BE MECHANICALLY CODED TOGETHER WITHTHE MATCHING MOUNTING PLATE THE RIBBON CABLE CAN BE ROUTED THROUGH THE DEVICE WITH ANY DESIRED ORIENTATION ENABLING THE INSTALLER TO REACT FLEXIBLY TO THE CABLE ROUTING
|
|
ELECTRONIC LOAD RELAYS - SINGLE-PHASE - PHOENIX CONTACT PRESENTS SINGLE-PHASE ELECTRONIC LOAD RELAYS. MODEL ELR 1/25-240 AND ELR 1/35-600. THESE RELAYS ARE BASICALLY USED IN AC VOLTAGE NETWORKS WHEREVER SILENT SWITCHING, HIGH SWITCHING FREQUENCIES AND A PRACTICALLY UNLIMITED MECHANICAL LIFE ARE NEEDED. THE ROBUST POWER SEMI-CONDUCTORS SWITCH IN ZERO-VOLTAGE CROSSING AND THUS CREATE NO ADDITIONAL HIGH-FREQUENCY INTERFERENCES. THE MODULES ARE INSENSITIVE TO SHOCK LOADS AND VIBRATIONS EVEN USE IN AGGRESSIVE, POLLUTED ENVIRONMENTS IS UNPROBLEMATIC. RECURRENT AREAS OF APPLICATION ARE: PRODUCTION MACHINES, TEMPERATURE CONTROLLERS, CONVEYOR EQUIPMENT AND LIGHT AND LIGHTING SYSTEMS.
|
|
SPRING CAGE TERMINAL BLOCK WITH SURGE VOLTAGE PROT - MANUFACTURER OF MULTISTAGES SURGE VOLTAGE PROTECTION. CAPABLE OF CARRYING
|
|
TERMINAL STRIPS - PHOENIX CONTACT, ALONG WITH EPLAN S&S, HAS DEVELOPED THE PROJECT PLANNING SOFTWARE CLIP PROJECT 4.0 FOR EVEN QUICKER PLANNING AND EASIER ORDERING OF TERMINAL STRIPS. CLIP PROJECT PROFESSIONAL IMPLEMENTS UNIVERSAL DATA EXCHANGE WITH EPLAN 5 AND EPLAN 21. PRODUCT SELECTION IN THE SOFTWARE TAKES PLACE MANUALLY OR AUTOMATICALLY VIA THE DATA EXPORT FROM EPLAN. FOR OTHER CAE (COMPUTER-AIDED ENGINEERING) SYSTEMS, AN ASCII INTERFACE IS AVAILABLE. THE INTERACTIVE COLOUR GRAPHICS VIEWER ENSURES SIMPLE OPERATION. THE NOMINAL CROSS-SECTION OF THE WIRES USED, LABELLING FOR TERMINALS. AND EPLAN SYMBOL TYPES 100 TO 149 AND OTHER INTERNATION IS DIRECTLY IMPORTED. USING THE AVAILABLE DATA, THE SOFTWARE PLANS OUT THE COMPLETE TERMINAL STRIPS INCLUDING BRIDGE, SEPARATOR PLATES, COVERS, AND LABELS. THE GENERATED DATA AUTOMATICALLY GETS SENT BACK TO EPLAN 5.30/5.40 AND EPLAN 21. IN CONJUNCTION WITH EPLAN 5.40, IT IS ADDITIONALLY POSSIBLE TO ANALYSE SPACE-EFFICIENT MULTI-LEVEL TERMINALS. THE DOCUMENTATION ON THE TERMINAL STRIPS, INCLUDING TRUE-TO-SCALE COLOR GRAPHICS, CAN BE PRINTED OUT. THIS PRODUCT DATA USED IN CLIP PROJECT CAN BE UPDATED VIA THE INTERNET AT ANY TIME.
|
|
COMPACT HOUSING FOR HIGH DENSITY CONNECTIONS - THE HOUSINGS IN THE NEW S-LINE INTERBUS PRODUCT RANGE OFFERED BY PHOENIX CONTACT ARE CONNECTIONS IN A SMALL SPACE FOR EIGHT SENSORS OR ACTUATORS WITH STANDARDIZED M8 ROUND PLUG CONNECTORS. THEIR COMPACT DESIGN GIVES THE HOUSINGS APPLIED TO HIGH PACKING DENSITY USE IN MACHINES. THE PLUG CONNECTORS ARE PLACED IN A ROW TO ENABLE EASY HANDLING. THE MODULES CAN ALSO BE PROVIDED WITH ITS HARSH INDUSTRIAL ENVIRONMENTS DIRECTLY BY THE SENSORS/ACTUATORS, THE HOUSINGS ARE BUILT TO PROTECTION CATEGORY IP 67. THE HOUSING IS PROVIDED WITH A STANDARDISED M12 ROUND PLUG CONNECTOR FOR CONNECTING THE S-LINE MODULE TO THE BUS. STANDARD M12 CABLE IS APPLIED TO ACHIEVE APPLICATION-ORIENTED WIRING TO THE FIELD BUS AND POWER SUPPLY. Y-PLUGS OR 3-WAY ADAPTERS ENABLE SPUR LINES OF A FEW CENTIMETERS UP TO SEVERAL METERS IN LENGTH TO BE LAID TO THE I/O MODULES, SO THAT EVEN DISTANT SENSORS/ACTUATORS CAN BE REACHED. A CONTROL BUTTON MODULE WITH FOUR ILLUMINATED BUTTONS PROVIDES EASY MACHINE CONFIGURATION SUCH AS START/STOP AND JOG FUNCTIONS FOR MOVEMENTS. WIRING IS DONE WITH A SPECIALLY LABELED M12 Y-PLUG THAT PERMITS FOR INTEGRATING A TWO-CHANNEL SAFETY CIRCUIT INTO THE EXISTING WIRING. TWO CABLES ARE PROVIDED HERE FOR CONNECTING EMERGENCY CUT-OUT BUTTONS OR SAFETY DOOR SWITCHES TO THE STANDARD SAFETY RELAY.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
