|
|
Electrical Equipment & Accessories
|
Suppliers Directory
|
BASELINE TECHNOLOGIES
| | Address : |
40/127 CR PARK EXTENSION |
| Telephone : |
11 6446808 |
| Fax : |
11 6474782 |
|
Email is not available |
| |
|
Products |
|
DATALOGGING VIBRATION METERS - DATALOGGING VIBRATION METERS (MODEL 3050) SUITED TO THE TASK OF COMPUTERISED VIBRATION BASED MACHINERY CONDITION MONITORING THESE VIBRATION METERS ARE BASED ON THE PREMISE THAT ALLROTATING MACHINES TEND TO SHOW A RISING TREND OF VIBRATION ON THE BEARING HOUSINGS BEFORE A BREAKDOWN OCCURS THESE ARE BATTERY OPERATED INSTRUMENTS WITH MEMORY FOR SEVERAL VIBRATION READING THESE READINGS CAN BE PRECONFIGURED IN SEQUENCES IN PCS AND LOADED ONTO THE INSTRUMENT THE VIBRATION METERS CAN MEASURE VELOCITY ACCELERATION DISPLACEMENT AND BEARING SPIKE
|
|
VIBRATION MONITORING SYSTEM - 80 - THE VIBRATION MONITORING SYSTEM 8000 IS A MODULAR MULTI-CHANNEL PERMANENTLY INSTALLED VIBRATION MONITORING SYSTEM WITH ONE POINT CONNECTED TO ONE PLUG-IN-MODULE HAVING THE FACILITY TO MONITOR EITHER VELOCITY OR ACCELERATION. UP TO 6 MODULES CAN BE STUFFED INTO ONE SUB-RACK. THERE ARE 3 SET POINTS IN EACH MODULE, EACH WITH THEIR OWN FLOATING CONTACTS, IT ALSO COMES WITH A DIGITAL SCANNING TYPE DISPLAY FOR A GROUP OF 6 MODULES. ANY NUMBER OF SUB-RACKS CAN BE STACKED TO INCREASE THE CAPACITY OF THE UNIT TO ANY NUMBER OF POINTS. A DC OUT IS AVAILABLE FOR INTERFACING TO A STRIP CHART RECORDER AND OFFERS GREAT RESULTS IN ARDUOUS CONDITIONS FOUND IN STEEL PLANTS, SUGAR MILLS, CHEMICAL PLANTS AND POWER PLANTS.
|
|
PORTABLE BALANCER - 100 - PORTABLE BALANCER 1000D IS A LIGHTWEIGHT UNIT SUITABLE FOR FIELD-BALANCING OF ROTORS LIKE BLOWERS, INDUSTRIAL FANS, FLYWHEELS, PULLEYS, AND MOTORS. IT IS BASED ON THE PRINCIPLE OF VIBRATION MEASUREMENT AS AN AMOUNT (GIVEN ON THE METER) AND ANGLE (GIVEN BY THE STROBOSCOPE), THE COMPANY ALSO OFFERS HAND-HELD BALANCING COMPUTER WITH 1 AND 2-PLANE BALANCING PROGRAMS AS AN OPTIONAL ACCESSORY TO EASE THE COMPUTATIONS OF UNBALANCE. THE 1000D IS SUPPLIED IN A BRIEFCASE TYPE CASE AND IS EASY TO CARRY TO THE MACHINE NEEDING BALANCING. SINCE ROTORS CAN BE BALANCED IN-SITU, THERE IS NO NEED FOR TRANSPORTING THESE TO THE BALANCING MACHINE.
|
|
HAND-HELD VIBRATION METER - 20 - PERIODIC ASSESSMENT OF MACHINERY CONDITION USING VIBRATION MEASUREMENTS IS INCREASINGLY BEING ACCEPTED AS A VERY COST EFFECTIVE MAINTENANCE AID. VIBRATION METER 2050 IS A COMPACT HAND-HELD INSTRUMENT, SUITABLE FOR GENERAL-PURPOSE VIBRATION MEASUREMENT ON ROTATING MACHINERY AND IS IDEAL TO MEASURE RMS VIBRATION VELOCITY IN MM/SEC; IN ADDITION TO PK-PK DISPLACEMENT IN MICRONS AND RMS ACCELERATION IN THE IS/ISO SPECIFIED FREQUENCY BAND OF 10 HZ- 1,000 HZ. IN THE BEARING MODE, IT MEASURES BEARING SPIKE, WHICH IS THE HIGH FREQUENCY VIBRATION EMITTED TYPICALLY BY FAULTY BEARINGS. IT CAN THUS GIVE A VERY SOUND BASIS FOR MONITORING THE STATE OF BEARINGS IN AN OBJECTIVE MANNER AND OPERATES FROM IN-BUILT RECHARGEABLE NI-MH BATTERIES. THE VIBRATION SENSOR-AN ACCELEROMETER HAS NO MOVING PARTS, AND INTEGRAL AMPLIFIER, SO THAT THERE IS ABSOLUTELY NO EFFECT OF CABLE SHAKE ON THE MEASURED READINGS.
|
|
VIBRATION ANALYSER-CUM-BALANCER - 60 - THE BASELINE MICROPROCESSOR-BASED VIBRATION ANALYSER-CUM-DYNAMIC BALANCER 6050 IS DESIGNED TO GREATLY SIMPLIFY THE TASKS OF VIBRATION MEASUREMENT, FREQUENCY ANALYSIS AND IN-POSITION DYNAMIC BALANCING. ITS MICRO-CONTROLLER SCANS THE ENTIRE FREQUENCY RANGE LOOKING FOR SPECTRAL PEAKS. EACH PEAK CONTAINS VALUABLE INFORMATION: THE MAGNITUDE OF THE PEAK IS THE MAGNITUDE OF THE VIBRATION AND THE FREQUENCY IS RELATED TO THE NATURE OF THE DEFECT. ON EVENT OF IMBALANCE BEING THE DOMINANT CAUSE OF VIBRATION, A PEAK IS FOUND AT THE ROTATIONAL FREQUENCY WITH A MAGNITUDE COMPARABLE TO THE OVERALL VIBRATION. IN SUCH AN EVENT, THE NEXT LOGICAL STEP IS TO BALANCE THE ROTOR IN-SITU. THE 6050 ALSO PERFORMS THE VECTOR CALCULATIONS REQUIRED FOR 1-PLANE OR 2-PLANE DYNAMIC BALANCING, GIVING DIRECT RESULTS WHERE CORRECTION MUST BE MADE IN AMOUNT AND ANGLE. WITH THE PC SOFTWARE VSCAN, THE SPECTRA CAN BE QUICKLY TRANSFERRED TO THE PC OVER A SERIAL PORT, WHICH CAN NOT ONLY BE SAVED, AND PRINTED, BUT A HOST OF TOOLS ALLOW THE INFORMATION IN THE SPECTRUM TO BE UNLOCKED. ENVELOPING IS ONE SUCH POWERFUL TOOL, WHERE LIMITS ARE PLACED ON A GOOD SPECTRUM AND IF ANY PORTION OF THE SPECTRAL REGION GROWS BEYOND THE ENVELOPE, AN ALARM IS REPORTED - PINPOINTING THE DEFECT DEVELOPING IN THE MACHINE. IT IS FOR WIDELY VARYING VIBRATIONS AS TYPICALLY FOUND IN INDUCTION MOTORS, THE UNIT OFFERS A STATISTICAL ROUTINE IN WHICH THE MINIMUM, MAXIMUM AND MEAN OF 20 SUCCESSIVE READINGS ARE REPORTED.
|
|
VIBRATION METER - 20 - PERIODIC ASSESSMENT OF MACHINERY CONDITION USING VIBRATION MEASUREMENTS IS INCREASINGLY BEING ACCEPTED AS A VERY COST EFFECTIVE MAINTENANCE AID. VIBRATION METER 2040 IS A COMPACT HAND-HELD INSTRUMENT, SUITABLE FOR GENERAL PURPOSE VIBRATION MEASUREMENT ON ROTATING MACHINERY AND CAN MEASURE RMS VIBRATION VELOCITY IN MM/SEC; IN ADDITION TO PK-PK DISPLACEMENT IN MICRONS IN THE IS/ISO SPECIFIED FREQUENCY BAND OF 10 HZ- 1,000 HZ. THE VIBRATION SENSOR-AN ACCELEROMETER HAS NO MOVING PARTS, AND INTEGRAL AMPLIFIER, SO THAT THERE IS ABSOLUTELY NO EFFECT OF CABLE SHAKE ON THE MEASURED READINGS.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
