|
|
Electrical Equipment & Accessories
|
Suppliers Directory
|
FITZER INSTRUMENTS (I) PVT LTD
| | Address : |
248 ATALI PO MOHONE, AMBIVALI (W) KALYAN, |
| Fax : |
91-251-2271321/2270788 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
GLASS TUBE ROTAMETERS - THESE ROTAMETERS ARE DESIGNED TO MEET THE NEEDS OF CHEMICAL AND ALLIED INDUSRTRIES PILOT PLANTS AND LABORATORIES WHERE RATE OF FLOW OF LIQUID OR GAS INSIDE A PIPELINE OR TUBING IS TO BE MEASURED WITH A CERTAIN DEGREE OF ACCURACY AVAILABLE IN THE REQUIRED RANGE WITH HIGH/LOW FLOW ALARMS THE MINIMUM RANGE FOR AIR IS 200 CC/MIN AND FOR WATER 10 CC/MIN MAXIMUM RANGES ARE 500 M3/HR FOR AIR AND 40 M3/HR FOR WATER ALL ROTAMETERS ARE INDIVIDUALLY CALIBRATED FOR ACCURACY FOR BETTER +2% OF FULL RANGE
|
|
CAPACITANCE TYPE LEVEL INDICATOR/CONTROLLER - THIS DEVICE FROM FITZER INSTRUMENTS (INDIA) IS A DEVICE FOR LEVEL SENSING FOR CONTINUOUS INDICATION. THIS UNIT IS APPLIED TO NON-FOAMING CONDUCTIVE LIQUIDS WITH LOW/MEDIUM VISCOSITY LIKE WATER, WATER BOUND SOLUTIONS AS WELL AS NON-CONDUCTIVE LIQUIDS LIKE MINERALS OILS, ETC. THESE LEVEL TRANSMITTERS WORKED WITH VARIATION OF CAPACITANCE VALUES CAUSED BY LEVEL CHANGES AROUND THE ELECTRODE. THE ELECTRODE GENERATE A CONDUCTOR WITH THE CONTAINER WALL AND THE PRODUCT. THE CAPACITANCE VALUE CHANGES PROPORTIONAL TO THE LEVEL. THE OSCILLATOR TRANSFORMS CAPACITANCE CHANGE INTO A DC SIGNAL. THE MEASUREMENT UP THIS INSTRUMENT CONVERTS DC SIGNAL TO PROPORTIONAL 4 - 20 MA.
|
|
LEVEL INDICATOR/CONTROLLER - FITZER CAPACITANCE TYPE LEVEL INDICATOR/DONTROLLER IS A VERY FLEXIBLE DEVICE FOR LEVEL SENSING FOR CONTINUOUS INDICATION. THIS UNIT IS APPLICABLE FOR NON-FOAMING CONDUCTIVE LIQUIDS WITH LOW/MEDIUM VISCOSITY LIKE WATER, WATER BOUND SOLUTIONS AS WELL AS NON-CONDUCTIVE LIQUIDS LIKE MINERALS OILS, ETC. THESE LEVEL TRANSMITTERS ARE BASED ON THE PRINCIPLE OF VATIATION OF CAPACITANCE VALUES CAUSED BY LEVEL CHANGES AROUND THE ELECTRODE. THE ELECTRODE FORMS A CONDUCTOR WITH THE CONTAINER WALL AND THE PRODUCT. THE CAPACITANCE VALUE OF WHICH CHANGES PROPERTIONAL TO THE LEVEL. THE OSCILLATOR TRANSFORMS CAPACITANCE CHANGE INTO A DC SIGNAL. THE EVALUATION EQUIPMENT CONVERTS THE DC SIGNAL TO PROPORTIONAL 4-20 MA CURRENT.
|
|
DIGITAL PRESSURE CALIBRATOR - DIGITAL PRESSURE CALIBRATOR MODEL DGM-800, IS A HAND/TABLE TOP, MICROPROCESSOR BASED DIGITAL PRESSURE CALIBRATIOR. DEVELOPED FOR SUPERIOR PRECISION, REPEATABILITY IN MEASUREMENT OF PRESSURE USING HIGHLY STABLE TEMPERATURE COMPENSATED PRESSURE SENSORS WITH MICROPROCESSOR TECHNOLOGY AND SOFTWARE, THIS PRECISION PRESSURE CALIBRATOR OFFERS MANY OPERATIONAL FEATURES SUCH AS ANY SELECTATABLE PRESSURE UNIT, AUTO ZERO FUNCTION, PEAK HOLD MODE, ETC. ALL CALIBRATORS ARE AVAILABLE WITH CALIBRATION REPORTS. BASIC SPECIFICATIONS: RANGES BETWEEN 0-200 MM WC GAUGE TO 20000 MM WC; SELECTABLE UNITS - MM/INCHES OF WC/HG, KG/CM, PSI, MBAR, BAR, KPA; AND PRECISION - 0.1% OF RANGE.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
