|
|
Electrical Equipment & Accessories
|
Suppliers Directory
|
SUMITRON MARKETING
| | Address : |
27 COMMUNITY CENTRE, NARAINA, PHASE-1 |
| Telephone : |
011-2579678325799519 |
| Fax : |
91-11-25891761 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
MAT & TABLE TOP CLEANER - THIS IS A NON-ABRASIVE CLEANER FOR GENERAL USE ON WORKSTATIONS, DESKS AND VIRTUALLY ANY SURFACE IN THE OFFICE, HOME OR WORKPLACE. IT CAN BE USED FOR ANY PRODUCTION AREA IT REMOVES SURFACE DIRT ON CHAIR OR OTHER MATS. IT ENHANCES SURFACE RESISTIVITY O OF ANTI-STATIC MATS LEAVES NO FILM, IS NON-STREAKING, AND NON-FLAMMABLE; SAFE ON ANY SURFACE; AND EFFECTIVELY REMOVES FLUX RESIDUES, OIL, FINGER MARKS, GREASE, NICOTINE, DIRT OR GRIME AND INORGANIC CONTAMINANTS.
|
|
DISPENSING VALVE CONTROLLER-VC-1195A - SUMITRON MARKETING OFFERS A DISPENSING VALVE CONTROLLER IT CAN CONTROL TWO DISPENSING VLVES SIMULTANEOUSLY, PNEUMATIC LOGIC PROVIDES A CONTINUOUS VILVE-OFF STATE TO ANY VALVE DESIGNED FOR A 4-WAY OPERATION. A WIDE RANGE OF AUTOMATED DISPENSING SOLUTIONS IS AVAILABLE FROM THE COMPANY.
|
|
PICK & PLACE ROBOTS - THESE HIGH ROBOTS USED FOR PICK AND PLACE APPLICATIONS SUCH AS LOADING AND UNLOADING OF PARTS PLACEMENT OF COMPONENTS COVERS LENSES CAPS ETC A RANGE OF BOTH VACUUM AND MECHANICAL GRIPPERS IS AVAILABLE WHICH MAKE THESE MACHINES ADAPTABLE TO MANY APPLICATIONS THE ROBOTS CAN CARRY MAXIMUM OF 3 KG WITH REPEATABILITY OF 0.02 MM POINT TO POINT MOVEMENT SPEED IS 1500 MM SEC LINES AND ARCS ARE QUICKLY INTERPOLATED BY THE ONBOARD 32 BIT PROCESSOR THE PICK AND PLACE ROBOTS CAN BE PROGRAMMED USING TEACHING BOXES OR FROM PCS VIA RS 232 CONNECTIONS
|
|
GANTRY POWER ROBOTS - I&J FISNAR INC IS MANUFACTURING A NEW SERIES OF HIGH-POWER, SERVO-DRIVEN, GANTRY-STYLE CARTESIAN DISPENSING ROBOTS WITH WORKING AREAS UP TO 32" X 24". THE NEW ROBOT USE BALL SCREW TRANSMISSIONS TO ENSURE HIGH REPEATABILITY AND I&J 9000 POWER SERIES IS BEST FOR USE WITH CONVEYOR OPERATIONS REQUIRING A CARTESIAN GANTRY ROBOT AND COMPETITIVELY COST FOR BENCH APPLICATIONS THAT NEED XYZ MOVEMENT ABOVE THE WORK. ROBOTS ARE CREATED IN THREE- AND FOUR-AXES DESIGNS AND ARE FULLY INTERPOLATED IN ALL AXES. PROGRAMMING IS DONE BY AN EASY-TO-LEARN TEACH PENDANT.
|
|
BENCH ROBOTS TO REDUCE THE COST OF AUTOMATIC DISPE - ROBOTS ARE EASILY JUSTIFIED IN PERFORMANCE, QUALITY IMPROVEMENTS AND HOURS OF OPERATION. I&J FISNAR INC ENJOYS A PROVEN RECORD WITH HUNDREDS OF ROBOT INSTALLATIONS IN THE USA AND THOUSANDS WORLD WIDE. THE NEW 2000 AND 7000 SERIES OFFER EVOLUTIONARY IMPROVEMENTS IN CAPACITY AND EASE OF PROGRAMMING WITH LOW MAINTENANCE AND NO INCREASE IN COST. VIRTUALLY AND DISPENSING OPERATION CAN BE AUTOMATED, AND I&J FISNAR'S FREE VIDEO SERVICE (CLIENT PAYS SHIPPING) ALLOWS A PROSPECTIVE USER TO SEE THE JOB PROGRAMMED AND A DISPENSE OPERATION COMPLETED; THE VIDEO IS NARRATED ON A CD OR VIDEOTAPE AND RETURNED WITH THE PARTS AND MATERIAL. I&J FISNAR INC OFFERS A COMPLETE RANGE OF DISPENSING ROBOTS, VALVES AND ACCESSORIES.
|
|
BENCH DISPENSING ROBOTS - PRESENTING NEW 7000 BENCH TOP CARTESIAN ROBOTS THAT HANDLE DISPENSING AREAS OF 8 X 8 INCHES UP TO 16 X 16 INCHES. EACH ROBOT IS CAPABLE OF STORING 99 PROGRAMS WITH A TOTAL POINT CAPACITY OF 99,000. RESOLUTION IS 0.01 MM AND A STANDARD PC KEYBOARD CARRIES OUT POINT-TO-POINT OR CONTINUOUS PATH PROGRAMMING. THE 70003-AXIS FAMILY PROVIDES A INSTRUMENT COST SAVING WHEN COMPARED TO EXISTING BENCH ROBOT SYSTEMS. STEP-BY-STEP INTUITIVE INSTRUCTIONS SIMPLIFY LEARNING AND JOB CRATION TASKS, ALLOWING A PROGRAM TO BE ENTERED AND RUNNING IN MUNUTES. A ROBUST CAST CONSTRUCTION AND A QUITE, VIBRATION-FREE MOTOR MOTION ENSURE STABILITY TO FINE TOLERANCES DURIG THE DISPENSING OPERATION. Z-ZXIS AND TABLE LOADS ARE SUFFICIENT TO HANDLE HEAVY WORKLOADS AND VALVE DISPENSING MODULES. AN 8-CHANNEL I/O INTRFACE PROVIDES FOR COMMUNICATION WITH EXTERNAL APPARATUS FOR SECONDRARY APPLICATIONS AND MULTIPLE DISPENSING EQUIPMENT COMPONENTS. VIRTUALLY ANY DISPENSING OPERATION CAN BE AUTOMATED, AND I & J FISNAR'S FREE VIDEO SERVICE (CLIENT PAYS SHIPPING) ALLOWS A PROSPECTIVE USER TO SEE HIS JOB PROGRAMMED AND A DISPENSE OPERATION COMPLETED.
|
|
PRECISION TWIN-PACK CARTRIDGE DISPENSER (50 ML) - DISPENSING SMALL SHOTS OF TWO-PART MATERIALS ACCURATELY FROM 50 ML TWIN CARTRIDGES BECOME DIFFICULT, DUE TO THE PROBLEMS OF MATERIAL DROOLING AFTER THE SHOT CYCLE AND THE UNNECESSARY WASTE AND CLEAN UP IT IS HARD TO CONTROL THE SHOT SIZE USING PNEUMATIC OR MANUAL CARTRIDGE GUNS, I & J 123-D50 FROM I & J FISNAR INC IS DESIGNED TO ELIMINATE THE PROBLEMS OF WORKING WITH 50ML CARTRIDGES WHEN ACCURATE AND REPATABLE DISPENSE CYCLING IS REQUIRED, THIS INCLUDES A STEPPING MOTOR DRIVE, COUPLED BY A HYDRO-LINK TO A DOUBLE CONTACT-RAM THAT ENTERS BOTH BARRELS OF THE 50 ML CARTRIDGE. THE CONTROL UNIT HOUSES THE STEPING MOTOR AND A PALM COMPUTER FOR CONTROLLING THE SISPENSE SETUP AND INCROPORATE A GRAPHICAL DISPLAY TO INDICATE SIBLE USING THE L & J 123-D50.
|
|
GANTRY POWER ROBOTS - I&J FISNAR INC IS MANUFACTURING A NEW SERIES OF HIGH-POWER, SERVO-DRIVEN, GANTRY-STYLE CARTESIAN DISPENSING ROBOTS WITH WORKING AREAS UP TO 32" X 24". THE NEW ROBOT USE BALL SCREW TRANSMISSIONS TO ENSURE HIGH REPEATABILITY AND I&J 9000 POWER SERIES IS BEST FOR USE WITH CONVEYOR OPERATIONS REQUIRING A CARTESIAN GANTRY ROBOT AND COMPETITIVELY COST FOR BENCH APPLICATIONS THAT NEED XYZ MOVEMENT ABOVE THE WORK. ROBOTS ARE CREATED IN THREE- AND FOUR-AXES DESIGNS AND ARE FULLY INTERPOLATED IN ALL AXES. PROGRAMMING IS DONE BY AN EASY-TO-LEARN TEACH PENDANT.
|
|
SCARA ROBOT - SCARA ROBOT OF MODEL TMB 100 FORM FROM I & J FISNAR INC, IS AN COST EFFECTIVE AND NATURAL CHOICE WHEN CHOOSING A ROBOT ARM FOR A ROTARY WORK-CELL OR CONVEYOR APPLICATIONS. THE SYSTEM HAS AN ACTUAL WORKING AREA OF 400 * 380 MM EITHER LEFT OR RIGHT- HANDED. PROGRAMMING FEATURES HIGH LEVEL, EASILY UNDERSTOOD, STEP-BY-STEP INSTRUCTIONS, AND THE SOFTWARE IS AVAILABLE IN A DISPENSING FORMAT FOR FLUID DISPENSING OPERATION OR AS GENERAL PURPOSE FOR PICK-N-PLACE OPERATIONS. THE ROBOT IS A SYSTEM THAT IS CONTROLLED BY A CLOSED-LOOPED ENCODER AND HAS SEVERAL INPUT-OUTPUT FUNCTIONS FOR COMMUNICATION TO OTHER SYSTEMS. A WINDOWS EDITING PROGRAM USE FOR ENABLES EDITING AND CONVERSION OF CAD COORDINATES. TMB 100 MODELS ARE AVAILABLE IN THREE AND FOUR AXIS CONFIGURATIONS.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
