|
|
Electrical Equipment & Accessories
|
Suppliers Directory
|
HOT WATT INDUSTRIES
Hot Wat Is One Of The Leading Manufacturers Of All Kind Of Industrial Heating Elements Since 1987 With Clients Like Client Are Exide Batteries, D.g.p.windor, Cadbury, Finolex, Videocon, L&t, Spicer India, Vi.p.ind., Etc
| | Products : |
Commercial & Industrial Water Immersion Heaters, Oil Immersion Heaters Along With Check Nut & Washers, Alkali Immersion Heaters For Vertical Use , Strip Heaters , Finned Strip Heaters , Silica Cased Immersion Heaters (re-wireable) ,immersion Heater For Horizontal Use , Immersion Heaters For Vertical Use (re-wireable), Cartridge Heaters Incased In Brass Sheath. |
| Address : |
46, VISHAL INDUSTRIAL ESTATE,
NEAR CEAT TYRE, VILLAGE ROAD,
BHANDUP (WEST),, |
| Telephone : |
91 - 22 - 568 8292 |
| Fax : |
91 - 22 - 565 32 97 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
ENERGY SAVING CERAMIC BAND HEATER - SPECIFICALLY DESIGNED TO REPLACE AND UPGRADE MICA BAND HEATERS ON INJECTION AND EXTRUSION MACHINES. THE BODY OF THE CERAMIC BAND HEATER IS CONSTRUCTED OF PRECISION MADE SEGMENTED CERAMICS, WHICH ADD FLEXIBILITY AND ALLOW FOR EASY INSTALLATION. THE CERAMICS ARE COVERED WITH INSULATION, WHICH SERVES TO LOWER THE SHROUD TEMPERATURES AND CONCENTRATES THE HEAT TOWARDS THE BARREL. THE END RESULTS ARE LESS WASTED ENERGY, A LOWER WATTAGE REQUIREMENT AND A LONGER HEATER LIFE. AN ADDITIONAL METAL JACKET WITH CERAMIC FIBRE INSULATIN WRAPPED AROUND THE HEATER ARREST HEAT LOSSES FROM THE OUTER SURFACE OF THE HEATER RESULTING IN ABOUT 20% OF ENERGY SAVING. MATERIALS OF CONSTRUCTION: OUTER SHEATH-POLISHED SS 304; CERAMICS-STEATITE; ELEMENT-RESISTANCE WIRE (NI-80%, CR-20%); TERMINATION-METAL BRAIDED FIBRE GLASS WIRES; AND INSULATION-FLEXIBLE ASBESTOS SHEET OR CERAMIC FIBRE COVERED WITH ALUMINIUM FOIL TO AVOID BLACK SPOTS ON OUTER SHEATH. DEPENDING UPON THE VOLTAGE AND WATTAGE A SUITABLE SIZE OF THE RESISTANCE WIRE IS SELECTED AS PER THE RECOMMENDATION OF THE RESISTANCE WIRE MANUFACTURER. THE COIL OF THE WIRE IS THEN PASSED THROUGH THE CERAMICS TO GET A BED OF THE CERAMICS. THE SIZE OF THE BED DEPENDS ON THE DIA AND THE WIDTH OF THE HEATER.
|
|
IMMERSION HEATERS FOR VERTICAL USE IN ALKALI - IMMERSION HEATERS FOR VERTICAL USE IN ALKALI ARE AVAILABLE FROM HOT WATT INDUSTRIES FOR USE IN ALKALIS. THE IMMERSION HEATERS FOR VERTICAL USE HAVE CHROME NICKEL SHEATHED HEATED ELEMENTS BRAZED TO CI JUNCTION BOX FOR MOUNTING ON THE SIDE OF THE VESSEL IT IS EASY TO REMOVE AND CLEAN. USED FOR HEATING ALKALINE CLEANING SOLUTION DETERGENTS AND OTHER ALKALINE SOLUTIONS NORMALLY CORROSIVE TO MILD STEEL (UP TO 90 C). THESE ARE ALSO AVAILABLE IN TITANIUM TUBE. IT HAS FOUR MODELS. WHICH ARE MANUFACTURED USING THE FINEST RAW MATERIAL AND RAW MATERIAL AND THE FINISHED PRODUCTS ARE SUBJECT TO STRICT QUALITY CONTROL TEST AT VARIOUS STAGES.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
