|
|
Electrical Equipment & Accessories
|
Suppliers Directory
|
ENDRESS+HAUSER (INDIA) PVT LTD
| | Address : |
T PRODUCTS DIVISION EXCOM HOUSE, GROUND FLOOR (SOUTH WING) |
| Telephone : |
022-8521458, 8520668. |
| Fax : |
91-22-8521927. |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
CAPACITATE LIMIT SWITCH - INTRODUCED BY ENDRESS+HAUSER(INDIA) THE CAPACITIVE LIMIT SWITCH , MODEL MINICAP FTC 260, WHICH IS DESIGNED FOR APPLICATIONS IN LIGHT BULK SOLIDS SUCH AS GRAIN PRODUCTS, , GRANULES, ANIMAL FODDER ETC. AS A SMALL CAPACITIVE INSTRUMENT, MINICAP PROFFERS MORE PERFORMANCE THAN OTHER SWITCHES BUT COSTS JUST THE SAME.WITH SIMPLE INSTALLATION AND NO CALIBRATION THE SWITCH IS BASED ON THE PLUG AND PLAY PRINCIPLE. IT HAS BOTH ACTIVE BUILD-UP COMPENSATION AND AN EXTREMELY RUGGED CONSTRUCTION. ITS COMPACT DESIGN, UNIVERSAL APPLICATION AND PRICE MAKE IT HIGHLY SUITABLE FOR TURNKEY PROJECTS. IT IS THE MOST SAFEST IN DIFFICULT CONDITIONS AND REQUIRES NO MAINTENANCE. MINICAP OFFERS TWO ELECTROMAGNETIC INTERFERENCE IMMUNE ELECTRONIC INSERTS: WITH RELAY OUTPUT, AC OR DC POWERED AND WITH PNP OUTPUT, WITH 3-WIRE DC POWER.
|
|
LIMIT SWITCHES - LIMIT SWITCHES IS THE LATEST INNOVATIVE PRODUCT FROM ENDRESS+HAUSER (INDIA).THIS IS THE LATEST GENERATION OF VIBRATION LIMIT SWITCHES THAT MEASURE LEVEL LIMITS OF LIQUIDS USING VIBRATION TECHNOLOGY. THE MEASUREMENT PRINCIPLE USES A VIBRATING FORK FOR DETECTING LEVEL LIMITS, WHICH WAS INITIALLY PATENTED BY THE COMPANY IN 1966. LIQUIPHANT M IS FUNDAMENTAL FOR RELIABLE LIMIT DETECTION IN LIQUIDS IN ALL BRANCHESAND MEDIA. IT CAN BE MOUNTED ANYWHERE IN ANY PLANT AND OPERATES RELIABLY IN ALL TYPES OF LIQUIDS WITH A VISCOSITY OF MAX. 10,000 CST. ITS FUNCTION IS TOTALLY INDEPENDENT OF TURBULENCE, MATERIAL BUILD-UP ELECTRICAL PROPERTIES, SOLIDS OR GAS CONTENT, FOAM OR EXTERNAL VIBRATION. THE COMPLETE INSTRUMENT HAS A NUMBER OF ELECTRONICS OPTIONS, INCLUDING NAMUR AND THREE DIFFERENT TYPES OF HOUSING - PLASTIC, STAINLESS STEEL OR ALUMINIUM. IT ALSO HAS ALL COMMON PROCESS CONNECTIONS WITH THREADS FROM 3/4-INCH UPWARDS AS WELL AS CERTIFICATES TO ENSURE THAT IT CAN BE USED IN ALMOST A LIMITLESS NUMBER OF APPLICATIONS ANYWHERE IN THE WORLD AND IN ANY BRANCH OF INDUSTRY.
|
|
LIQUID LEVEL SWITCHES - ENDRESS+HAUSER COMES THORUGH WITH LIQUIPHANT T FTL 260, A LEVEL SWITCH FOR LIQUIDS, OF WHICH MORE THAN 1 MILLION UNITS HAVE BEEN SOLD ACROSS THE GLOBE. ONE OF THE MAIN REASONS FOR THIS SUCCESS IS THAT THE LEVEL LIMIT SWITCH LIQUIPHANT T IS UNIVERSALLY APPLICABLE. IT IS USED IN ALL THOSE APPLICATIONS WHERE FLOAT SWITCHES ARE UNSUITED BECAUSE OF BUILDUP, AIR BUBBLESTURBULENCES, CURRENTS, ETC. THE FORK OF THE LIQUIPHANT IS DRIVEN BY A PIEZOELECTRIC CRYSTAL TO VIBRATE WITH ITS RESONANCE FREQUENCY OF 400HZ IN AIR. WHEN SUBMERGED IN A LIQUID, THE FILLING MATERIAL CHANGES THE OSCILLATION FREQUENCY. THE FORK SWINGS THEN AT A FREQUENCY BETWEEN 120 HZ TO 350 HZ IN LIQUIDS. THIS CHANGE IN FREQUENCY IS THE BASIS FOR THE MEASUREMENT IN LEVELS. OUTSIDE THIS FREQUENCY RANGE THE INSTRUMENT WILL RECOGNISE A MALFUNCTION AND WILL INDICATE THE ALARM. THE CHANGE IN OSCILLATION FREQUENCY HAPPENS DURING IMMERSION DUE TO THE CHANGE OF THE DENSITY FROM AIR INTO LIQUID AS WELL AS THE LENGTH OF THE FORK. A NON-STOP OPERATION OF THE LIQUIPHANT IS GUARANTEED IF THE MINIMUM DENSITY OF THE LIQUID IS MORE THAN 0.7 G/CM3 AND WITH A VISCOSITY OF UP TO 10000 MM2/S. THE SWITCHING SIGNAL IS EITHER A PNP TRANSISTOR OR A TWO WIRE AC (19 - 253 V) OUTPUT. TUNING FORKS, USED IN LEVEL MEASUREMENT, ARE MOUNTED CLOSE TO THE HEIGHT OF THE LIMIT AND OR LOWER LEVELS, USUALLY AT THE SIDE OF THE SILO. THE MOUNTING POSITION SHOULD BE CONSIDERED SO THAT THE FILLING DOES NOT AFFECT THE FUNCTION OF THE SENSOR. IF SOME BASIC RULES ARE CONSIDERED, THESE TUNING FORKS ARE UNIVERSAL AND RELIABLE LIMIT SWITCHES. SOLID STATE ELECTRONICS REQUIRE NO SETUP, NO MAINTENANCE, NO CALIBRATION OR TRAINED PERSONNEL.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
