|
|
Electrical Equipment & Accessories
|
Suppliers Directory
|
ARUN ENTERPRISES
| | Address : |
32A GANESH CHANDRA AVENUE 4TH FLOOR, |
| Telephone : |
91-33-22361376 91-33-22369759 |
| Fax : |
91-33-22154821 |
| Send : |
On-Line Trade Inquiry |
| |
|
Products |
|
TRUE RMS DIGITAL MULTIMETER MODEL DM4 - PRESENTED BY ARUN ENTERPRISES THE TRUE RMS DIGITAL MULTIMETER, MODEL DM-454 IS WITH THE FOLLOWING FEATURES: DISPLAY - 4-1/2 DIGIT LIQUID CRYSTAL DISPLAY (LCD) WITH A MAXIMUM READING OF 19999; POLARITY - AUTOMATIC, POSITIVE IMPLIED, NEGATIVE POLARITY INDICATION; OVER RANGE - (1) OR (-1) IS DISPLAYED; ZERO - AUTOMATIC; LOW BATTERY INDICATIONS; AUTO POWER OFF; MEASUREMENT RATE - 2.5 TIMES PER SECOND, NOMINAL; OPERATING ENVIRONMENT - 0°C TO 50° C AT LESS THAN 70% R.H, STORAGE TEMPERATURE - -20°C TO 60°C, 0 TO 80% R.H WITH BATTERY REMOVED FROM METER; AND ACCURACY - STATED ACCURACY AT 23°± 5°C LESS THAN 5% RELATIVE HUMIDITY. THE DIMENSIONS OF THE INSTRUMENT: 197.5 (H) X 90 (W) X 44 (D) MM; AND WEIGHT - APPROX 400G INCLUDING BATTERY. ACCESSORIES: ONE PAIR TOST LEADS, ONE SPARE FUSE, 9 V BATTERY (INSTALLED) AND OPERATING INSTRUCTIONS. SAFETY: DESIGNED TO MODEL IEC 1010.1, CATH III 1000V, CLASS 2 AND POLLUTION DEG 2 INDOOR USE COMPLY WITH CE, UL.
|
|
DIGITAL AC/DC CLAMP TESTER MODELDT 42 - OFFERED BY ARUN ENTERPRISES DIGITAL AC/DC CLAMP TESTER MODELDT 42 COMES WITH FEATURES LIKE 3-3/4 DIGITS 3999 LCD DISPLAY; INCORPORATES CMOS LSI CIRCUIT FOR AUTOMATIC TRANSFER OF MEASURING RANGE, MAXIMUM CLAMP DIA: 52 MM, DATA HOLD FACILITY, LOW BATTERY INDICATOR, AUTO POWER OFF, AND 2 X 1.5 V ‘AA’ SIZE BATTERY OPERATED. THE EXTERNAL SIZE IS: 248 (L) X 388 (W) X 345 (H) MM; WEIGHT: APPROX, 360G (BATTERIES INCLUDED); AND COMPLETE WITH CARRYING CASE, INSTRUCTION MANUAL, TEST LEADS, BATTERIES. THIS IS THE ONLY CLAMP TESTER WHICH MEASURES: AC/DC MA CURRENT UP TO 100 MA FROM INPUT TERMINALS; AC/DC CURRENT UP TO 1000A; 0.01 HZ TO 20 MHZ; 100 MICRO F CAPACITANCE; DIODE TESTING FACILITY; AUDIBLE CONTINUITY TESTING FACILITY; AND DESIGNED IN ACCORDANCE WITH SAFETY REQUIREMENTS OF IEC 1010-1 STANDARD.
|
|
DIGITAL CLAMP METER (MODEL DT125) - ARUNE ENTERPRISES PRESENTS DIGITAL CLAMP METER (MODEL DT125) THIS BRING TOGETHER CMOS LSI CIRCUIT FOR AUTOMATIC TRANSFER OF MEASURING RANGE. OTHER FEATURES: 3-3/4 DIGIT - 3999 COUNTS, LCD DISPLAY; AC/DC FLOW 40 MA/100 MA AC/DC (MEASUREMENT OF AC/DC MA, CURRENT WITH TEST LEADS); MAXIMUM CLAMP DIA: 52 MM; DATA HOLD FACILITY; LOW BATTERY INDICATION; AUTO POWER OFF; POWER SUPPLY 3 V BATTERY (TWO 1.5 V CELLS); WEIGHT APPROX 360 GM; ACCESSORIES: LEADS, MANUAL, BATTERY, CARRYING CASE; AUDIBLE CONTINUITY; FREQUENCY AND CAPACITATIVE MEASUREMENT; AND AN IDEAL TOOL FOR ELECTRICAL MEASUREMENT MADE IN ACCORDABLE WITH WITH IEC-1010-1 SAFETY STANDARDS.
|
| |
|
View More Supplier Pages
Page(s) : 1 •
2 •
3 •
4 •
5 •
| |
|
|
|
